62
Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets, or a
handset and the telephone base.
You can buy additional expansion handsets (AT&T model TL90031/TL90041/
TL90051/TL90061/TL90071, sold separately) for this telephone system. You
can register up to 12 handsets to the telephone base.
Initiate an intercom call
Using a handset:
Press MENU on the handset in idle mode.
Press CID or DIR to highlight Intercom, then
press SELECT .
Your handset displays INTERCOM and a list of devices.
Press CID or DIR to highlight a destination
device and then press SELECT . Your handset
displays Calling HANDSET X, Calling BASE 0 or
Calling all devices .
-OR-
Press 0 for BASE 0, 1-9 for handset 1-9, TONE and 0 for
handset 10, TONE and 1 for handset 11, or TONE and 2
for handset 12. Your handset displays Calling HANDSET X or
Calling BASE 0, or Calling all devices The other device rings and
displays HANDSET X is calling.
-OR-
Press TONE and then # (pound key) to call all devices.
The destination device(s) rings and displays HANDSET X is calling, or
HANDSET X is calling all.
1.
2.
•
–
–
–
Answering sys
Directory
Caller ID log
Intercom
BACK
SELECT
INTERCOM
BASE 0
HANDSET 1
HANDSET 2
BACK
SELECT
To Next Page
Loading...
