60
Telephone operation
Handset locator
This feature helps you find a misplaced handset.
To start paging:
Press /HANDSET LOCATOR on the telephone base when it is not in use. All
idle handsets ring and display
**
Paging
**
.
To end paging:
Press /HANDSET LOCATOR on the telephone base.
-OR-
Press HOME/FLASH
,
/SPEAKER, CELLULAR, PUSH TO TALK,
REDIAL/PAUSE, EQ
or any dialing key (0-9, # (pound key),
TONE
) on
the handset.
NOTES:
If the handset ringer volume is set to off, the handset still rings when paged.
While the telephone base is paging, you may press MUTE/DELETE, OFF/CANCEL or
SILENCE on the handset to mute the paging tone.
If there is no response after 60 seconds, paging ends.
•
•
•
To Next Page
Loading...
