37
Telephone settings
Handset and telephone base settings
No line
If there is no telephone line connected to the telephone base, the screens
show No home line. If you do not want to display this message on the
screens (for example, if you use the cell line only), you can turn off the no
line alert.
To reset the missed call indicator:
Press MENU in idle mode to enter the main menu.
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight Settings, then
press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight Display alerts,
then press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight Home line,
then press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to highlight No line, then
press SELECT .
Press CID or DIR on the handset, or press CID or
DIR on the telephone base to choose On or Off, then
press SET to save. When you choose Off the handset
displays If the line is not connected, an alert will not
appear. You hear a confirmation tone.
1.
2.
3.
4.
5.
6.
HOME ALERTS
Missed calls
Voicemail
No line
BACK
SELECT
NO LINE ALERT
On
Off
BACK
SET
HOME ALERTS
Missed calls
Voicemail
No line
BACK SELECT
NO LINE ALERTS
On
Off
BACK SET
To Next Page
Loading...
