13
Temporary tone dialing
Temporary tone dialing is used only when you have rotary service. It allows you
to access to services that require tone signaling, including some tone-activated
computer systems (e.g., telephone banking).
To change from pulse (rotary) to tone dialing during a call:
1. Dial a telephone number with the dial switch set to DP (pulse).
2. Press TONE ; all buttons pressed aer this will send tone signals.
3. Aer you hang up, the phone automatically returns to rotary service.
Memory features
This telephone can store up to 10 dierent phone numbers, each up to 21 digits
long. Numbers will remain stored in memory unless you erase or change them by
entering other numbers.
Note: Numbers programmed into a memory location might not be retained if the telephone has
been unplugged from the line jack for a half hour or more.
Directory card: Remove the directory card. Write
your telephone number in the space provided.
Also write the telephone numbers (or names)
that you want to store in each memory location.
Reinstall the card and clear plastic cover.
Operate
Memory dialing
To Next Page
Loading...
