6
Wall-mount installation
1. Fill in directory card
Remove the directory card and write in
your own telephone number. Also write the
telephone numbers (or names) that you want
to store in each memory location (See Page
13). Reinstall the card and clear plastic
cover.
2. Reverse handset tab
To install the telephone on a wall jack, you must reverse
the small tab above the directory card. This tab holds the
handset in place when you hang up.
With the directory card and plastic cover removed, lift and
remove the handset tab.
Reverse the tab and reinstall it, as shown below. Then,
replace the directory card and cover.
3. Plug the line cord into the jack on the underside
of the base
Feed the line cord into the channel and wind it
around the mounting area. Feed the last portion
(as short as possible), through one of the slots in
the mounting area.
Wall-mount installation (optional)
180°
To Next Page
Loading...
