AT&T TRIMLINE 213 - Speed Dialing

14
Speed dialing
Ten telephone numbers can be stored in standard speed-dialing locations. You can
dial any of these numbers by pressing two buttons.
To program numbers into memory:
1. Li the handset.
2. Press PROG/MUTE.
3. Press MEM.
4. Enter a digit (0-9) for the memory location where you want to store the number.
5. Enter the telephone number. You will hear a click when each button is pressed.
6. Press PROG/MUTE.
7. Hang up aer the number is entered correctly.
8. Repeat Steps 1-7 to store another number.
To dial:
1. Li the handset and listen for dial tone.
2. Press MEM.
3. Press memory location (0-9).
To erase numbers from memory:
To erase any number from memory, you can enter another number in the same
location.
Memory dialing