What do I do if I see the SSID but failed to
connect?
1.
Check if the password you entered is the correct one.
2.
Check if WPS security is enabled on your PC. If so,check the device to see
if it is expecting a WPS action from your PC.
What if there's no service?
The possible reasons are an unstable network signal or a hardware problem.
You can try the following solutions:
1.
If you are inside a building or near a structure that maybe blocking the
signal, change the position or location of the device. For example, try moving
the device close to a window.
2.
Check the hardware for any loose parts or damage.
3.
Log in to the WebUI to review any error messages and follow the steps
provided.
To Next Page
Loading...
