EasyManua.ls Logo

ATC PH1000T - Page 4

ATC PH1000T
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ATC ELECTRICAL & MECHANICAL
ATC House,
Broomhill Drive, Tallaght, D24 EF99
IRELAND
tel +353 1 4625111
fax +353 1 4520887
www.atc.ie sales@atc.ie
A minimum air gap of at least 90 cm should always
be allowed between the top of the heater and a ceiling or roof.
The heater should be at least 60 cm away from any surrounding walls.
A distance of at least 100 cm should always be left in front of the heaters to
ensure safety
The Heater should be mounted at a minimum of 20cm above ground level.
The Heater must not be located either directly below, or in front of a socket-
outlet.
The heater must be installed so as to prevent any control switches being able
to be touched by anyone who is in the shower or bath.
Make sure that there is no possibility of inflammable material, combustible
material or curtains coming into contact with the heater, there is a risk of fire
if this happens.
Do not cover the heater.
DO NOT LEAVE THE HEATER UNATTENDED DURING USE.

Related product manuals