ATCOM A10 Quick Start Guide

A10/A11/A10W/A11W Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
Server.
9 Static: If you want to set the IP as static, you should fill IP, Netmask,
Gateway and DNS information.
b) Password Configuration
Enter "Network" -> "Advance" page.
There are 2 modes to set the authority of web accessing and command line:
User mode and Admin mode. All the parameters can be visible and changed in
Admin mode while part of them can be visible in User mode.
9 Enable Web Server: enable or disable web access. If choose "no", you can
not access A10/A11/A10W/A11W’s webpage.
9 Admin password: set admin webpage access password.(username:admin)
9 User password: set user webpage access password.(username:user)
c）Account Configuration
Enter "Account" -> "SIP" page to configure SIP account which is provided from
the SIP Server.
9 Display Name: This name will display on the screen of
A10/A11/A10W/A11W. It will display the name configured for the SIP
account by the SIP server preferentially. It can also be kept blank.
9 User ID: Username of SIP account.

ATCOM A10 Specifications

General

Brand	ATCOM
Model	A10
Category	IP Phone
Language	English