ATCOM A10 Quick Start Guide

A10/A11/A10W/A11W Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
D. Disassemble the feet:
Push the plate and pull the feet according to the direction of the arrow. When the
plate is pulled out of the slot, you can take off the feet
2. Wall-hung Installation
A. Put the bottom side of the IP phone upside and press one-side joints of
wall-hung stand bracket into the slot, please refer the picture as below:

ATCOM A10 Specifications

General

Brand	ATCOM
Model	A10
Category	IP Phone
Language	English