Atdec VISIDEC FOCUS ARTICULATED ARM DOUBLE - User Manual

Many experts believe that the extended use of any computer
screen has the potential to cause serious injury to your eyes,
neck and back. This can be largely avoided by correctly
positioning your display.
Viewing Angle: Ergonomists recommend that the optimal position
of your display should be slightly below eye level. When looking at the
display’s centre the user should have a downward visual angle of
approximately 10°-20°.
Height: As a guide, the height (h) of your display should approximately
be as follows: - Tall Male (Max): 560mm (22”)
- Short Male (Min): 368mm (14½”)
- Tall Female (Max): 520mm (20½”)
- Short Female (Min): 356mm (14”)
Distance: For visual comfort, a viewing distance (d) between 500mm
(20”) to 750mm (29½”) is recommended.
Tilt Angle: Angular adjustments to reduce reflection on your display
should range between 5° forward tilt to 15° backward tilt.
USER
OPERATING CARD
For your comfort and safety please take
a few moments to adjust the position of
your display
Ergonomic Guidelines
To adjust the Visidec Focus Articulated
Arm Double please refer to the
instructions overleaf. Use the Ergonomic
Guidelines on the back page as a guide
for correct positioning.
Please do not
remove card from the
Visidec Focus
Articulated Arm Double

Summary

Ergonomic Guidelines

Viewing Angle

Optimal display position should be slightly below eye level, with a downward visual angle of 10°-20°.

Height

Guide for display height based on user stature, with specific measurements for male and female users.

Distance

Recommended viewing distance for visual comfort, between 500mm and 750mm.

Tilt Angle

Angular adjustment range (5° forward to 15° backward) to minimize display reflections.

Adjusting Height

Height Adjustment Steps

Sequential steps for unlocking, lifting/lowering, and locking the display height, often requiring two people.

Adjusting the Display Bracket

Tilt and Pan Adjustments

Instructions on adjusting screen tilt (up/down) and pan (left/right) by loosening and tightening specific points.

Portrait;Landscape Orientation

Procedure for orienting the display between portrait and landscape modes, with a maximum angle specified.

Atdec VISIDEC FOCUS ARTICULATED ARM DOUBLE Specifications

General

Brand	Atdec
Model	VISIDEC FOCUS ARTICULATED ARM DOUBLE
Category	Racks & Stands
Mounting Type	Desk Mount
Number of Supported Displays	2
Screen Size Compatibility	Up to 27 inches
VESA Mounting Patterns	75x75mm, 100x100mm
Weight Capacity per Arm	8 kg
Swivel Range	180°
Rotation	360°
Product Type	Monitor Arm
Desk Clamp Thickness Range	10 mm to 50 mm
Cable Management	Integrated cable management
Finish	Black