EasyManua.ls Logo

Atek 1-10KVA User Manual

Default Icon
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
28-2TITAN0019
USER MANUAL
ON LINE UPS
1-10KVA
Uninterruptible Power Supply
Question and Answer IconNeed help?

Do you have a question about the Atek 1-10KVA and is the answer not in the manual?

Atek 1-10KVA Specifications

General IconGeneral
BrandAtek
Model1-10KVA
CategoryUPS
LanguageEnglish

Summary

Safety and EMC Instructions

Installation Guidelines

Guidelines for correctly installing the UPS unit in a suitable environment.

Operation Instructions

Instructions and precautions for operating the UPS safely and effectively.

Maintenance and Fault Handling

Procedures and warnings for maintenance, servicing, and handling faults.

Handling, Storage, and Compliance

Information on UPS transport, storage, and compliance with standards.

Description of Commonly Used Symbols

Introduction – 1K/2K/3K

System Description

Connection and Operation

Connection and Operation for 1K/2K/3K Models

Detailed steps for connecting and initially operating the 1K, 2K, and 3K UPS models.

Trouble Shooting

Maintenance

Operation Maintenance

Recommendations for maintaining UPS batteries to maximize their lifespan.

Storage Maintenance

Guidelines for proper storage of the UPS unit and its batteries.

Technical Data

Electrical Specifications

Input and output electrical parameters, including voltage, current, and frequency.

Operating Environment

Specifies the recommended operating conditions for temperature, humidity, and altitude.

Stored Energy Time

Provides typical battery backup times at different load levels for various models.

Dimensions and Weight

Lists the physical dimensions and net weight of the different UPS models.

Introduction – 6K(S)/10K(S)

Product Specification and Performance

Details specifications and performance characteristics for 6K and 10K UPS models.

Installation

Unpacking and Inspection

Steps for unpacking the UPS, checking contents, and inspecting for damage.

Power Cord and Grounding Installation

Instructions for connecting power cords and ensuring proper earth ground.

External Battery Connection Procedure

Procedure for connecting external batteries to long backup time UPS models.

Parallel Operation Setup

Guidelines for connecting multiple UPS units in parallel for redundancy or capacity.

Operation and Operating Mode

UPS Startup Operation

Instructions for starting up the UPS in various power conditions.

UPS Shutdown Procedures

Procedures for safely shutting down the UPS in different modes.

Parallel Machine Management

Procedures for adding or removing UPS units in a parallel system.

Standard Model Backup Time

Graphs showing backup time for standard models at different load levels.

Battery Maintenance

Notes for Battery Disposal and Battery Replacement

Operating Mode for All Models

Utility Power Mode

Explanation of the UPS's behavior and display indicators in utility power mode.

Battery Mode

Explanation of the UPS's behavior and display indicators in battery mode.

Bypass Mode

Explanation of the UPS's behavior and display indicators in bypass mode.

Abnormality Mode Indicators

Description of the UPS operating in abnormal mode and fault indications.

Communication Port

RS232 Communication Interface

Pin assignment details for the DB-9 connector for RS232 communication.

AS400 Communication Interface (Optional)

Pin assignment details for the optional AS400 communication card.

Software for All Models

Appendix 1–Display Panel (for 6K(S)/10K(S))

Appendix 2–LED Display Form for 6K(S)/10K(S)

Appendix 3–Back Panel Diagrams

Related product manuals