1. Safety and EMC instructions
1.4 Transport
★ Please transport the UPS only in the original packaging (to protect against shock and
impact).
1.5 Storage
★ The UPS must be stockpiled in the room where it is ventilated and dry.
1.6 Standards
Only the units with CE markings are comply with the following standards:
◇ For 1KVA/2KVA/3KVA
* Safety
IEC/EN 62040-1-1
* EMI
Conducted Emission...............................:IEC/EN 50091-2 CLASS B
Radiated Emission..................................:IEC/EN 50091-2 CLASS B
Harmonic Current....................................:IEC/EN 61000-3-2
Voltage Fluctuation and Flicker...............:IEC/EN 61000-3-3
*EMS
ESD........................................................:IEC/EN 61000-4-2 Level 4
RS..........................................................:IEC/EN 61000-4-3 Level 3
EFT.........................................................:IEC/EN 61000-4-4 Level 4
SURGE..................................................:IEC/EN 61000-4-5 Level 4
Low Frequency Signals.........................:IEC/EN 61000-2-2
◇ For 6KVA/10KVA
* Safety
IEC/EN 62040-1-1
* EMI
Conducted Emission.................................:IEC/EN 50091-2 Current>25A
Radiated Emission....................................:IEC/EN 50091-2 Current>25A
* EMS
ESD.......................................................:IEC/EN 61000-4-2 Level 4
RS.........................................................:IEC/EN 61000-4-3 Level 3
EFT........................................................:IEC/EN 61000-4-4 Level 4
SURGE.................................................:IEC/EN 61000-4-5 Level 4
Low Frequency Signals.........................:IEC/EN 61000-2-2
Warning: This is a product for restricted sales distribution to informed partners.
Installation restrictions or additional measures may be needed to prevent
disturbances.
To Next Page
