Do you have a question about the Atek 1-10KVA and is the answer not in the manual?
Guidelines for correctly installing the UPS unit in a suitable environment.
Instructions and precautions for operating the UPS safely and effectively.
Procedures and warnings for maintenance, servicing, and handling faults.
Information on UPS transport, storage, and compliance with standards.
Detailed steps for connecting and initially operating the 1K, 2K, and 3K UPS models.
Recommendations for maintaining UPS batteries to maximize their lifespan.
Guidelines for proper storage of the UPS unit and its batteries.
Input and output electrical parameters, including voltage, current, and frequency.
Specifies the recommended operating conditions for temperature, humidity, and altitude.
Provides typical battery backup times at different load levels for various models.
Lists the physical dimensions and net weight of the different UPS models.
Details specifications and performance characteristics for 6K and 10K UPS models.
Steps for unpacking the UPS, checking contents, and inspecting for damage.
Instructions for connecting power cords and ensuring proper earth ground.
Procedure for connecting external batteries to long backup time UPS models.
Guidelines for connecting multiple UPS units in parallel for redundancy or capacity.
Instructions for starting up the UPS in various power conditions.
Procedures for safely shutting down the UPS in different modes.
Procedures for adding or removing UPS units in a parallel system.
Graphs showing backup time for standard models at different load levels.
Explanation of the UPS's behavior and display indicators in utility power mode.
Explanation of the UPS's behavior and display indicators in battery mode.
Explanation of the UPS's behavior and display indicators in bypass mode.
Description of the UPS operating in abnormal mode and fault indications.
Pin assignment details for the DB-9 connector for RS232 communication.
Pin assignment details for the optional AS400 communication card.