ATEL V810 Series Voice-Only User Manual
V5.6, June 8, 2022
3.
Using Your V810 for Voice Functions
Making Calls
Before making a call, make sure the signal strength on the LCD is good enough. If no
signal bars are lit, move the V810 to a location that can receive a signal.
Place a call by entering the desired phone number. In most areas, you will need to include
the three-digit area code, even when dialing a local number. When your call is complete,
simply hang up the phone.
Receiving Calls
When an incoming call is received, the screen will light up and the incoming call phone
number is displayed. Simply answer the connected telephone as you normally would.
Call Waiting
If a call comes in while you are on the phone, you’ll hear a click, and the 2
nd
incoming
phone number appears on the device screen (if available). Press the Flash Button on the
phone to put the first call on hold and answer the second call. When you hang up or press
Flash again, you are reconnected with the first call.
Missed Calls
If you do not pick up an incoming call, the V810 screen displays a Missed Call. Short
press the Power Key to switch to the “Missed Calls” submenu and check the missed call
number(s).
Note: The Missed Calls Menu shows up to the 3 most recent missed calls and will be
To Next Page
Loading...
