ATEQ F620 - Page 19

QSG_F620.283.00_EN_01 / 2019-02-20
19 / 46
Pin number Inputs / outputs Description
14 Output Warning
15 Output End of cycle
16 0 V Ground
The device can be energized through theJ11 connector of the relay board (except if internal
supply option):
0V to the pin16
24VDC to the pin2 or4.
Program selection extension connector (J10) (option)
The J10 connector is an extension of the J11 connector that enables the selection of128
programs.
Characteristics
— Inputs
• Activation: + 24 V DC.
Pin number Inputs/outputs Description
I8 Input 8 Program selection from 33 to 64 (programmable input)
I9 Input 9 Program selection from 65 to 128 (programmable input)