ATEQ TPMS User Manual

1
TPMS Tool
User Manual
01/2022 – EN

ATEQ TPMS Specifications

General

Category	Test Equipment
Frequency	315 MHz, 433 MHz
Compatibility	Works with most TPMS sensors
Connectivity	Bluetooth
Connectivity Type	USB, Bluetooth, Wi-Fi
Weight	Approx. 0.5 kg
Dimensions	Approx. 20 x 10 x 5 cm
Functionality	Activation, Programming

Summary

1. User Manual

1.1. Specifications

Details the technical specifications of the TPMS tool, including battery, dimensions, and frequency.

1.1 Important Safety Instructions

Crucial safety guidelines and warnings for using the TPMS tool to prevent hazards.

1.2. Warnings and Precautions

Covers general warnings, cleaning, storage, and usage safety for the tool.

2. Using the TPMS Tool

2.1. Check TPM

Details reading TPMS sensors and reprogramming the vehicle's ECU via OBD-II port.

2.1.1. Selecting Vehicle Model

Guides on selecting the vehicle make, model, and year for operation.

2.1.2. Indirect TPMS Vehicles

2.1.3. Reading TPMS Sensors

Step-by-step guide to read TPMS sensors after selecting a vehicle.

2.1.4. ECU Reprogramming via OBD-II

Process of copying sensor data to the vehicle's ECU using the OBD-II module.

2.1.4.1. OBD-II Errors and Resolution

Troubleshooting common OBD-II connection and data transfer errors.

2.2. TPMS Service Functions

Covers TPMS sensor maintenance and other related functions available on the tool.

2.2.1. Vehicle Selection Mode

How to select vehicle make, model, and year for TPMS service operations.

2.3. Select a Service

2.3.1. Relearning Procedures

Details the procedure to relearn new TPMS sensors into a vehicle's system.

2.3.2. Reading TPMS DTC Codes

Function to read and clear TPMS Diagnostic Trouble Codes from the vehicle.

2.3.3. Unlocking TPMS ECU

2.3.6. Help and Fault Resolution

2.3.7. Placard Adjustment

Allows changing tire pressure reference values stored in the vehicle's ECU via OBD-II.

2.4. Programming Blank Sensors

Describes how to program new programmable universal TPMS sensors.

2.4.1. Select by Sensor Make

2.4.2. Select by Vehicle Make

2.4.4. Creating a TPMS Sensor

Procedure for creating a new TPMS sensor with a randomly generated ID.

2.4.5. Copying a TPMS Sensor

Copies the ID from an original sensor to a new programmable sensor.

2.4.6. Copying All TPMS Sensors

Copies IDs from multiple old sensors to new programmable sensors, e.g., for winter tires.

2.4.7. Programming Faults

2.4.8. Retrieving TPMS Sensor IDs

2.4.9. Manual ID Entry

2.5. Search Functionality

2.5.1. Search by VIN

2.8. Settings Menu

2.8.2. Description of Tool Settings

2.8.4. Change Units Setting

2.9. WiFi Settings

2.9.1.1. WiFi Requirements

2.9.1.2. Sending Tasks to WebVT

2.9.1.3. Connect to a WiFi Network

2.10. WiFi Update

Procedure to update the tool's software and databases wirelessly via WiFi.

3. Miscellaneous Information

3.1. Charging the Battery

3.1.2. Troubleshooting TPMS Reading Problems

Diagnosing and resolving issues encountered when reading TPMS valves or sensors.

3.2. Updating Tool Firmware

Information on when and why the tool's firmware needs updating for optimal performance.

3.2.2. Install WebVT Software

3.2.3. Software Update Precautions

3.3. Warranty Information

3.3.1. Limited Hardware Warranty

3.4. Safety Precautions

Essential safety precautions and warnings for using the tool and its Li-Po batteries.

3.4.2. Battery Charging Safety

3.4.3. Charger Safety

3.4.4. Battery Safety Warnings

Safety warnings and precautions for the Li-Po battery, including risks of explosion and chemical release.

3.4.5. Li-Po Battery Use Instructions

Detailed safety instructions for charging, storing, and handling Li-Po batteries.