ATEQ TPMS - Change Geographical Zone Setting

80
Set the time before the tool switches off automatically when not in use by pressing:
• the up arrow to increase the delay by 1 minute
• the down arrow to reduce the delay by 1 minute.
It is possible to disable the tool's automatic power off function when not in use by reducing
the time to 1 minute and then pressing the down arrow again.
= next
= back
2.8.8. Change Geographical Zone setting
Use the arrow buttons to select the Geographical Zone icon in the Settings menu
= next
= back
Use the up or down arrows to select the region.