ATEQ TPMS - Print TPMS Information

99
3.1.1. Print TPMS information
Note: this function will only become activated after all the vehicle TPMS sensors have
been read.
1) Place the tool in its docking station and check that all the
TPMS sensors have been read.
2) Connect and check that the charger is properly connected to
the docking station.
3) Turn on the printer by pressing the button
until the green light on the printer blinks.
4) The printer is ready to use when the light is on.
This button feeds the paper through.
Note: communication between the tool and the printer is
provided by an infra-red connection.
5) Select the print icon
= print
= back
6) Print the results by pressing
OK