2.9.1.6. WiFi, advanced settings
If your WiFi connection requires advanced settings: specific network key, manual IP
address, TCP port configuration, connect the tool to your PC via the USB cable and open
the on your computer.
In the WebVT software:
• select WiFi set-up from the menu bar,
• then click on Manual configuration.
The manual WiFi configuration menu for the tool is displayed.
Manual configuration allows you
to:
• enter the name of the WiFi
network (SSID)
• manually enter the
password
• choose the type of WiFi
key
• manually configure the IP
address, the subnet mask
and the gateway of the
tool
• change the TCP port.
(UDP)
To Next Page
Loading...
