ATEQ TPMS - 2.1.3. Reading TPMS Sensors

19
= next
= back
2.1.3. Reading sensors
The tool is ready to read the TPMS sensors as soon as you have selected a vehicle
model.
The sensors are read starting with the front left wheel followed by the front right, rear right
and rear left wheels and ending with the spare if you indicated in the previous step that the
vehicle had 5 wheels equipped with TPMS sensors.
Place the tool close to the sidewall of the left front tire at the level of the left front wheel
valve and then press the Read sensor button to come out of standby and read the sensor.
Press
to come out
of standby
and read the
sensor