ATEQ TPMS - 2.9.1.3. Connect to a WiFi Network

83
Use the up or down arrows to select the WiFi icon then press OK.
= next
= back
The WiFi settings screen indicates the status of the WiFi connection. You can also:
• connect the tool to a WiFi network
• disconnect the tool from a WiFi network
• change WiFi network.
= next
= back
2.9.1.3. WiFi, connect to a network
To connect the tool to a WiFi network:
• Use the up or down arrows to select WIFI ACTIVATED
• press OK.
= next
= back