Need help?Do you have a question about the ATEQ AX6000 and is the answer not in the manual?
General| Brand | ATEQ |
|---|---|
| Model | AX6000 |
| Category | Test Equipment |
| Language | English |
Covers manual reading, safety systems, cable length, earthing, maintenance, and avoiding spills.
Presents ranges, measurement currents, accuracy, and resolution for the instrument.
Instructions for removing and reinstalling the 12 V DC battery pack.
Details the plugs for connecting test accessories, probes, and Kelvin probes.
Details the use of Up, Down, Enter, and Cancel keys for menu navigation and operations.
Shows the display layout for measurement results, parameters, and battery status.
Instructions for switching on the AX6000 instrument using its integrated battery.
Steps to lock test parameters using the default password or setting a personal code.
Procedure for unlocking test parameters by entering the correct password.
Describes the two test modes: Program mode and Sequence mode.
Step-by-step guide to create a new test program, including naming it.
Details the process for adjusting parameters like program name, current, and maximum reject.
Selecting the appropriate measurement current (10A, 1A, 0.1A) based on material.
Defining the threshold for considering a test part as 'fail'.
Setting the lower threshold for a test part to be considered 'pass'.
Details on using Auto-ranging or manual range selection for measurements.
Explains the Resistive and Inductive measurement modes and their symbols.
Explains how measurements are triggered by accessories contact or the Start key.
Introduces sequence programming using Winateq300 software, detailing its capabilities.
Describes the different windows and information displayed in the Winateq300 software.
Explains Global Actions (Reset, Download, Upload) and Sequence Actions (Copy, Paste).
Steps to create a new sequence among the 128 available in the Winateq300 software.
Methods for inserting programs into a sequence using drag-and-drop or right-click.
Describes using keys or right-click for moving, removing, and managing programs within a sequence.
Steps to set the instrument to 'Sequence' mode and enable 'Chaining PP' function.
How to select a specific sequence from the available list for execution.
How to perform measurements step-by-step within a selected sequence.
Allows changing step status like 'TO DO', 'CANCEL', or 'NOT APPLICABLE'.
Procedures for validating and saving a sequence or cancelling it.
Overview of the main menu hierarchy, showing parameters, mode, program, and settings.
Troubleshooting steps for when the device does not power on, including battery checks.
Troubleshooting for inaccurate measurements, focusing on contact quality and connections.
Troubleshooting for inconsistent readings, including battery, contacts, connections, and calibration.
Instructions and warnings for safely charging the Lithium Polymer battery.
Critical warnings about battery overheating, fire hazards, and extinguishing methods.
To Next Page
