ATEQ AX6000 - Chapter 4: Instrument Functions - System Settings - Auto Start and Program Deletion; Configuring Automatic Start

Chapter 4 – Functions of the instrument
UM-30300D-U User manual AX 6000 Page 39 / 54
2.6. AUTOMATIC START
The Automatic start function allows validating the automatic trigger of the measurement
when the accessories are making an electric contact with the part to control (current
control).
In the SYSTEM SETTINGS menu, select the Auto Start
function and validate with the
key.
SYSTEM
S
E
TTINGS
MENU
>Auto Start : Off
Reset program
reset all programs
By using the and keys, select On or Off to
validate or not the automatic start and then confirm by using the
key.
SYSTEM
S
E
TTINGS
MENU
>Auto Start : On
Reset program
reset all programs
2.7. PROGRAMS DELETION
This function will erase one or all the programs to reset them.
In the SYSTEM SETTINGS menu, select the Reset program
function to delete the current program or Reset all programs.
To delete all the programs contained in the device.
Warning! : Until the validation, the program or all the
programs will be definitively deleted!
Validate with the key.
SYSTEM
S
E
TTINGS
MENU
Auto Start : On
>Reset program
reset all programs
The instrument deletes the program or all.
Reseting program