ATEQ TPMS - 2.3.2. Reading TPMS DTC Codes

33
The tool is
ready to read
the first
sensor.
Press
to come out of
standby and
read the
sensor
Read each
sensor in the
order listed in
the
instructions.
Once the last
sensor has
been read,
the horn will
honk twice,
indicating the
relearn has
been
performed
successfully
Press
to come out of
standby and
read the
sensor
2.3.2. Reading TPMS DTC error codes
DTC stands for Diagnostic Trouble Codes.
This function enables the TPMS error codes to be read and cleared
= next
= back