ATEQ F670 Quick Start Guide

QSG_F670_363.00_EN_01_2021-02-09
8/42
PRINCIPLE OF A CYCLE
The measurement cycle is made of 4 main phases: fill, stabilization, test, dumping.
A Pressure auto zero additional phase 0 can be placed at the start or at the end of a cycle,
depending on the requirement of the operator.
0 Waiting phase
1 Fill phase
2 Stabilization phase
3 Test
4 Dumping

ATEQ F670 Specifications

General

Brand	ATEQ
Model	F670
Category	Test Equipment
Language	English