ATEQ F670 - Pneumatics Configuration

QSG_F670_363.00_EN_01_2021-02-09
22/42
PNEUMATICS CONFIGURATION
According to the part under test and the pressure range, different configurations can be used.
Direct mode – Low range
This configuration is used for direct mode at a pressure range from 0 to 500 kPa (72.5 PSI).
Connection
Option / description
Air supply 1
Connection of the air supply to the filter input (0.6 MPa (87 PSI))
Vacuum to 2
Connection of the vacuum (option)
3 to 4
Connection of the reference output to the reference part
5 to ATM
Output to be left to the atmosphere (exhaust of the part under test and the reference
part)
6 to 7
Connection of the test output to the part under test