ATEQ Quickset X - MANUAL RELEARN PROCEDURE; Pre-Relearn Instructions; Select Manual Relearn; Vehicle-Specific Steps

Pg. 10
MANUAL RELEARN
1
Before performing a manual
relearn, be sure to read the
relearn instructions. Select the
RELEARN button.
2
On the relearn selection screen,
select MANUAL RELEARN.
3
The tool will display a set of
instructions specic to that vehicle.
Once nished, return to the
vehicle screen by pressing the
C button.
*
In many manual relearns, the horn will sound twice indicating
the vehicle has successfully been put into “learn mode”.