Unit Repairs
It is recommended that units requiring service be returned to an
authorized service center. Before a controller is returned for service,
please consult the service center nearest you. In many cases, the
problem can be cleared up over the telephone. When the unit needs
to be returned, the service center will ask for a detailed explanation of
problems encountered and a Purchase Order to cover any charge.
This information should also be put in the box with the unit. This
should expedite return of the unit to you.
This document is based on information available at the time of its
publication. While efforts have been made to render accuracy to its
content, the information contained herein does not purport to cover all
details or variations in hardware, nor to provide for every possible
contingency in connection with the installation and maintenance.
Features may be described herein which are not present in all hard-
ware. Athena Controls assumes no obligation of notice to holders of
this document with respect to changes subsequently made.
Proprietary information of Athena Controls, Inc. is furnished for cus-
tomer use only. No other use is authorized without the written permis-
sion of Athena Controls, Inc.
Repairs
18
To Next Page
Loading...
Need help?
General