22 • Atheros Communications, Inc.
COMPANY CONFIDENTIAL
Display Settings
To change the display settings, choose Options > Display Settings from the menu. The
display settings dialog box contains tools to set the:
Signal Strength Display
Units
Sets the units used when displaying signal
strength: percentage (%) or dBm.
Refresh Interval
Use the up/down arrows to set the display refresh
interval in seconds.
Data Display
Sets the display to cumulative or relative:
Relative displays the change in statistical data
since the last update.
Cumulative displays statistical data collected
since opening the profile.
ACU Tools
Use the Action menu to access the Atheros Client Utility tools:
Enable/Disable Radio
Enable or disable the RF Signal on all Atheros
station reference designs.
Enable/Disable Tray
Icon
Enable or disable the tray icon.
Troubleshooting
Run the optional Troubleshooting Utility.
Manual LEAP Login
Log in to LEAP manually, if LEAP is set to
manually prompt for user name and password on
each login.
Reauthenticate
Reauthenticate to a LEAP-configured access
point.
Exit
Exit the Atheros Client Utility application.
To Next Page
Loading...
