4 Display Configurations
To connect your monitor
1
Power off your computer and monitor.
2
Plug the monitor cable into the appropriate connector.
3
Power on your monitor first, and then restart your computer so that
Windows® can detect the new hardware settings.
4
When the New Hardware Found Wizard appears, at the appropriate
prompt insert the ATI Installation CD to load the drivers for your
RADEON™ X300 Series card.
Display Configurations
Your RADEON™ X300 Series graphics card provides single display
functionality and TV Out. The following table lists the different ways you
can connect displays to your card.
Display
Configuration
Connector(s)
Used
Comments
Single CRT
display
VGA connector CRT- cathode ray tube analog display.
Single TV S-Video Out The S-Video out can also support a
composite connection via the S-
Video-to-Composite adapter.
Single TV Composite Out
CRT display +
TV
VGA connector +
S-Video Out
CRT display +
TV
VGA connector +
Composite Out
To Next Page
Loading...
