40 How TV Display Cannot Be Used
Overscan increases the size of the display, magnifying it and clipping
elements on all sides.
Place a check here to expand your television display to the outermost edges
of the television screen, leaving no black border around the edges.
Note: This will disable your controls for Screen Position and Screen
Size.
Adjust your TV screen position
1
Click Start, point to Control Panel.
2
If your Control Panel is in Category View:
Select Appearance and Themes, then click Display icon
.
If your Control Panel is in Classic View:
Double-click Display.
3
Click the Advanced button.
4
Click the Displays tab.
5
Click the TV button.
Your TV must be enabled before you can change its display
properties.
6
Click the Adjustments tab.
7
Click one of the four position arrows in the Screen Position area to
change your screen position. The four position arrows shift your
display left, right, up, or down.
8
Click OK or Apply to save the changes you have made.
Adjust the composite sharpness of your TV display
1
Click Start, point to Control Panel.
2
If your Control Panel is in Category View:
3
Select Appearance and Themes, then click Display icon
.
If your Control Panel is in Classic View:
Double-click Display.
4
Click the Advanced button.
5
Click the Displays tab.
6
Click the TV button.
To Next Page
Loading...
