3
CHAPTER 4:
Using Displays
Connecting Your Monitors
Your RADEON™ X300 Series provides hardware support for one VGA
monitor as well as TV output via a S-Video Out or Composite Out
connector.
Note: If you use multiple monitors, the RADEON™ X300 Series
card must be the primary graphics card. Normally, the system BIOS
determines which graphics card will be the primary.
Connections and Adapters for the RADEON™ X300 Series Card
X
Standard VGA Monitor Connector. To connect a VGA monitor
to the DVI-I connector, plug the supplied DVI-I-to-VGA adapter
into the DVI-I connector, then plug your monitor cable into the
adapter.
To Next Page
Loading...
