How TV Display Cannot Be Used 43
2
If your Control Panel is in Category View:
Select Appearance and Themes, then click Display icon
.
If your Control Panel is in Classic View:
Double-click Display.
3
Click the Advanced button.
4
Click the Displays tab.
5
Click the TV button.
Your TV must be enabled before you can change its display
properties.
6
Click the Advanced tab.
7
Drag the Luma Flicker Removal slider to adjust the luma flicker
removal setting on your TV display. The Maximum setting is
recommended.
8
Click OK or Apply to save the changes you have made.
Reset the advanced settings on your TV Display(if
available)
1
Click Start, point to Control Panel.
2
If your Control Panel is in Category View:
Select Appearance and Themes, then click Display icon
.
If your Control Panel is in Classic View:
Double-click Display.
3
Click the Advanced button.
4
Click the Displays tab.
5
Click the TV button.
Your TV must be enabled before you can change its display
properties.
6
Click the Advanced tab.
7
Click the Defaults button.
8
Click OK or Apply to save the changes you have made.
To Next Page
Loading...
