22 ATI Overlay Tab
Clone Mode Options tab
Clone Mode Options
Standard Video content is displayed on your Primary display only.
Theater Mode Video content is displayed on your Primary and Secondary
displays. Video content is displayed on your Secondary
display(s) is always in full screen mode. Note: your
computer must be set for 16-bit color depth or higher to
use this mode.
Same on all Video content is displayed on your Primary and Secondary
display in exactly the same manner. For example, all
displays will show video output in full screen mode.
Theater Mode
Settings
These settings are available when Theater Mode is
selected.
Same as source
video
The aspect ratio of the source video is maintained for full
screen display. Note: that this option may result in black
bars on either the horizontal or vertical sides of the video
display.
To Next Page
Loading...
