Atlantic Furniture NANTUCKET MURPHY BED User Manual

Adult assembly
READY
Page 1 of 7
ASSEMBLY INSTRUCTIONS
TWIN
Before assembling your Murphy bed, please read through these
instructions carefully and familiarize yourself with the different parts.
Phillips screwdriver
Customer supplied
HARDWARE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726
Wood screw 1” - 14 pcs
Spare - 1 pc
B
A
D
C
E
F
I
H
JCB M6 X 25mm - 10 pcs
PO :
Wooden dowel - 10 pcs
Spare - 1 pc
Spare - 1 pc
Wood screw 5/8” - 9 pcs
Spare - 1 pc
Metal pull - 6 pcs
Metal pull screw 25mm - 8 pcs
Allen wrench - 1 pc
Washer - 24pcs
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
Adjust quantity as needed.
G
Metal pull screw 40mm - 4 pcs
Spare - 1 pc
NANTUCKET MURPHY BED
WITH CHARGING STATION

Atlantic Furniture NANTUCKET MURPHY BED Specifications

General

Brand	Atlantic Furniture
Model	NANTUCKET MURPHY BED
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Parts List

Lists all components and hardware required for the Nantucket Murphy Bed assembly.

Step 1: Inserting Wooden Dowels

Attaches wooden dowels (A) into locator holes on side panels (03)(04) and drawer base (07).

Step 2: Attaching Side Panels to Drawer Base

Connects left and right side panels (03)(04) to the drawer base (07) using JCB screws (B).

Step 3: Attaching Top Panel

Secures the top panel (02) to the side panels using JCB screws (B) and Allen wrench (I).

Step 4: Installing Door Metal Pulls

Installs metal pulls (E) onto the door panel (05) using screws (F) and washers (H).

Step 5: Installing Drawer Metal Pulls

Installs metal pulls (E) on the drawer base using metal pull screws (G) and washers (H).

Step 6: Attaching Door Hinges

Lays the door flat and attaches the door hinge to the drawer base with wood screws (C).

Step 7: Folding and Latching Door

Lifts and folds the door, then latches it to the side panel.

Step 8: Securing Door Latches

Pushes the door closed and latches both sides securely.

Step 9: Attaching Back Panel

Attaches the back panel (06) to the cabinet assembly using wood screws (D).

Step 10: Opening the Murphy Bed

Pulls the drawer out fully, unlatches the door, and opens it folding down.

Step 11: Installing Mattress and Finalizing

Installs the folding mattress (08) and pushes the drawer base in to complete setup.