18
Allows any unforeseen presence to be managed.
For example: for Monday you programmed a Comfort temperature
period from 17:00 hrs to 23:00 hrs. You return at 15:00 hrs and the
appliance displays an Eco temperature.
You can manually increase the temperature.
One-off bypassing is active up until the next Comfort temperature
period that is defined in the program. The appliance then reverts to
its normal operation.
Before performing any action, illuminate the screen by pressing any key.
6.1 - Open window / Closed window
Enables detection of temperature variations associated with opening and closing your windows. If
you forget to turn off your appliance while a window is open for a long period, then this function
overcomes this problem and avoids unnecessarily heating your appliance.
The appliance automatically switches to Frost Protection mode
(7°C) when it detects an open window and returns to the
setpoint temperature when it detects its closure (the detection
time varies). The appliance reacts to the opening and closing of
windows according to several variables, which particularly
include:
the desired temperature in the room;
the outside temperature;
the configuration of the installation.
The use of this function is not recommended in corridors and in rooms located in the vicinity
of an entrance door opening onto the outside.
6.1.1 - Activating/Deactivating the function
For the Plinth version you can access the "Open window" function via the Prog mode.
To Next Page
Loading...
