To Next PageTo Next Page
Need help?Do you have a question about the Atlantic queen and is the answer not in the manual?
General| Brand | Atlantic |
|---|---|
| Model | queen |
| Category | Indoor Furnishing |
| Language | English |
Wooden dowels used for connecting parts, with spare included.
JCB M6 X 25mm screws for assembly, with spare.
Includes 1" and 5/8" wood screws for various assembly points.
Screws for attaching metal pulls, in 20mm and 40mm lengths.
Decorative and functional metal pulls for the drawer and door.
Tool provided for tightening specific fasteners.
Component forming the upper surface of the bed frame.
Left and right side panels that form the enclosure.
The main door panel that conceals the bed.
The base structure for the drawer mechanism.
The panel located at the rear of the unit.
The mattress designed to fold with the bed mechanism.
Insert wood dowels into designated locator holes on side panels and drawer base.
Attach left and right side panels to the drawer base using JCB screws and Allen wrench.
Secure the top panel to the side panels using JCB screws and Allen wrench.
Attach metal pulls to the door panel using metal pull screws and a Phillips head screwdriver.
Pull out drawer base and install metal pulls using screws and a Phillips head screwdriver.
Lay the door flat and secure it using wood screws and a Phillips head screwdriver.
Lift up, lay, and push the door mechanism as illustrated.
Close the door and lock both sides securely.
Attach the back panel to the cabinet assembly using wood screws and a Phillips head screwdriver.
Unlock, open, and lay down the folding door.
Install the folding mattress onto the bed frame.
Lift and fold the mattress upwards into the cabinet.
Position the folded mattress and bed mechanism into the main cabinet.
Lift the main door and fold it to close the unit.
Lock both sides and push the drawer base into the cabinet.
Lift the top panel and close the unit completely.
