20
USING THE APPLIANCE
Insert the 2 upper screws, taking care to leave a gap of 8 mm between
the screw head and the wall;
If the appliance is tted with towel bars, assemble this before hanging
the appliance on the wall.
Holding the appliance rmly, hang it on the two screws (before releasing
the appliance, check that it is fastened to the 2 screws).
Then secure the appliance with the lower screw.
FITTING THE APPLIANCE
196mm
358mm
88mm
Ø 6 mm / L : 35 mm
To Next Page
Loading...
