Atlantic TRINEO - Technical Specifications

10. Technical specications
Water heater 150 litres 200 litres
Dimensions mm
H 1177 x L 567 x
D 586
H 1497 x L 567 x
D 586
Empty weight kg
53 63
Tank capacity L
150 200
Hot / cold water connection ’’
3/4 3/4
Refrigeration line connection ’’ 3/8 & 1/4, Flare type 3/8 & 1/4, Flare type
Anti-corrosive protection
Hybrid ACI Hybrid ACI
Minimum water conductivity μS/cm
40 40
Predened water pressure MPa /
bar
0.6 / 6 0.6 / 6
Outside unit
Dimensions mm
H 542 x L 867 x D 353
Refrigeration line connection ’’ 3/8 & 1/4, Flare type
Mass kg 32
Inside unit model
Trineo 7
model
Trineo 9
model
Trineo 12
Dimensions mm
H 270 x L 834 x D 222
Refrigeration line connection ’’ 3/8
Mass kg 10
Main specications:
Nominal cooling cap. (min./
max.)
 2000
(1524/3200)
2500
(1530/3300)
3400
(1530/3500)
Nominal heating cap. (min./
max.)
 2500
(1276/5200)
2800
(1280/5400)
4000
(1339/5700)
  3900 4100 4100
Nominal abs. cooling cap  400 565 895
Nominal abs. heating cap  500 590 960
 m3/h 330/720 330/750 330/780
     

m3/h 1540 1540 1680
 m3/h 330/650 330/700 330/700
   

m3/h 1590 1590 1760
Warnings Installation Use
7171
EN