Pulling
♦
Never pull at girders, supports or walls with the
hydraulic attachment.
This would damage the hydraulic attachment and
the adapter plate. The carrier may lose stability. It
can topple over and cause injuries.
Lifting/Transporting
♦
Never use the hydraulic attachment to lift or
transport loads.
The hydraulic attachment was not constructed to lift
or transport loads. This would damage the hydraulic
attachment.
Impacting/chopping
♦
Do not use the hydraulic attachment to impact or
chop to destroy material.
This would seriously damage the hydraulic
attachment.
Moving objects
♦
Never use the hydraulic attachment to move
debris.
This would damage the hydraulic attachment.
41© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
OPERATIONCC 1700 U, 1700 S
To Next Page
Loading...
