Atlas Copco CC 1700 U - Ec Declaration; EC Declaration of Conformity (EC Directive 2006;42;EC)

EC DECLARATION
EC Declaration of Conformity (EC Directive 2006/42/EC)
We, Construction Tools GmbH, hereby declare that the machines listed below conform to the provisions of EC
Directive 2006/42/EC (Machinery Directive), and the harmonised standards mentioned below.
Part numberHydraulic demolition cutter
3363 0935 41CC 1700 U
3363 0935 51CC 1700 S
Following harmonised standards were applied:
♦
EN ISO 12100
Technical Documentation authorised representative:
Stephan Schröer
Construction Tools GmbH
45143 Essen
Germany
General Manager:
Lothar Sprengnetter
Manufacturer:
Construction Tools GmbH
45143 Essen
Germany
Place and date:
Essen, 2014-04-29
© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
64
CC 1700 U, 1700 SEC DECLARATION