Need help?Do you have a question about the Atlas Copco FlexiROC T20 R and is the answer not in the manual?
General| Brand | Atlas Copco |
|---|---|
| Model | FlexiROC T20 R |
| Category | Industrial Equipment |
| Language | English |
Introduction to the operator's manual and its purpose.
Identifies and labels the main parts of the drill rig.
Explains electrical, hydraulic, air, chassis, power pack, boom, and dust collector systems.
Details weight, performance, tilt angles, and operational environment limits.
Provides transport dimensions, operational coverage area, and danger zone.
Foreword, extra safety checks, and procedures before starting the machine.
Functionality tests after starting and checks performed during drilling operations.
General illustration of control elements and the remote control box.
Detailed explanation of remote control buttons, selectors, and operational modes.
Description of the PMI unit, screen navigation, parameters, and settings.
Manometer panel, gradient meter, CBM panel, electric cabinet, and emergency exclusion.
Overview of control points, general information, and operating safety warnings.
Procedures for starting and stopping the engine from CBM, PMI, and remote controls.
How to enable controls and general warnings for repositioning the drill rig.
Procedures for moving the rig from CBM, PMI, remote, and general tramming principles.
Guidelines for using the winch and performing translation with PMI/Remote control.
General safety warnings and risk of tipping for setting up the drill rig.
Step-by-step setup using PMI/Remote, general principles, and slope considerations.
Procedures to initiate drilling from PMI and the control panel.
Feeder adjustments and checks performed during drilling operations.
Loosening, detaching, adding, and unthreading drill rods.
Changing the drill bit, and troubleshooting common drilling problems.
Instructions for using the electric filler pump for refueling the drill rig.
To Next Page
