Atlas Copco FlexiROC T20 R - Stopping the Diesel Engine; Stopping from CBM; Stopping from PMI

61
Operator's instructions
5. Operating
Stopping the diesel engine
N.B.
If the engine is hot, run it at idling speed for a couple of minutes before
switching off.
Stopping from CBM
1 Turn machine ignition key C04 to
position 0
Stopping from PMI
1 Go to the work environment screen
From the default screen, press the
next key. From any other screen press
the back key until the work
environment screen is displayed.
Press key 5 to stop.