91
Operator's instructions
7. Drilling
5. on a, holding the position for 3 seconds at mid-travel
6. Activate automatic fast lowering of the drill by moving multi-function lever R15 on
A, holding the position for 3 seconds at the end of travel
7. To deactivate drill lowering, move and release multi-function lever R15 on B
Feeder adjustment during drilling
• The equipment can be damaged
• The drill rig can only be interrupted in
drilling mode or with emergency stop
The following adjustments can be made during drilling:
• Adjustment of drill thrust
• Adjustment of Anti-Jamming
• Adjustment of rod rotation speed
To Next Page
Loading...
