EasyManua.ls Logo

Atlas Copco FlexiROC T20 R - Using the Winch When Tramming

Atlas Copco FlexiROC T20 R
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
Operator's instructions
5. Operating
Using the winch when tramming
Risk from tipping and moving parts
May cause serious personal injury and
damage to property
Ensure that unauthorised personnel are
outside of the working area
Never use the winch with less than three
turns remaining on the winch drum
Risk from tipping and cable failure
May cause serious personal injury and
damage to property
The anchorage point must be firm and
secure (pay attention to local regulations)
The safety hook must not be able to slide or
detach from its attachment point
A damaged cable or hook must not be used
Check that the winch locking mechanism is
fully engaged in the drum before use,
following the attachment of the cable eye on
the anchorage point

Table of Contents

Related product manuals