17
Operator's instructions
2. Technical data
2. Technical data
FlexiROC T20 R
Weight (standard equipment without drill steel)
FlexiROC T20 R
Weight 5650 kg
Performance
Diesel engine, Cummins QSB3.3
power output at 2400 rpm/min 82 kW 110 HP
Temperature range in operation -25° C +40° C
Tramming speed, max. 10 Kmh
Traction force (low/high gear) 59 kN
Ground clearance 220 mm
Max. hydraulic pressure 290 bar
Noise Level
Max. engine speed (2500 giri/min.) 117 dB
Drilling (2500 giri/min.) 124,5 dB
Tilt angles
Note
Stability is specified with respect to CE standards stipulating that rigs must not be
operated on inclines steeper than 20 degrees without the use of a winch.
ANGLES MUST NOT BE COMBINED!
Tilt angles for drill rig when drilling:
longitudinally, max. (Downward/Upward)
20°
lateral (left/right).
15°
laterally, (left/right), in extreme positions.
15°
Tilt angles - tramming (in direction):
downward/upward, max. without winch
20°
laterally, max. (Left/Right)
15°
downward/upward, with winch
>20° - < 30°
To Next Page
Loading...
