28
Operator's instructions
4. Controls
Remote control box
The machine has an onboard control called the PMI and a remote radio control.
• Danger of accidental operation
• May cause serious personal injury and
damage to property
• The operator must always have an overview
of the drill rig and the remote control box
• Always check that the controls are correctly
adjusted before operating
• Always deactivate the remote control box
when it is not in use
• Do not activate the remote control from the
platform of the drilling carriage when using
the winch.
• When the remote control box is deactivated
then no functions can be controlled
To Next Page
Loading...
