60
Operator's instructions
5. Operating
2 The PMI starts; wait for the remote
control activation screen
3 Press run button R02 on the Remote
control
Wait for LED R16 to change from
fast to slow flashing.
4 Wait until the PMI displays the
screen indicating that the transmitter
and receiver are communicating and
then the safety circuit enable screen
appears
5 Activate the safety circuit by
pressing button R04 and, at the same
time, move the multi-function lever
to remote control
6 The start engine screen appears on
the PMI
7 Press start engine button R03 and
wait for the horn to sound; after 2
seconds the machine starts
To Next Page
Loading...
