67
Operator's instructions
5. Operating
N.B.
The gradient meter shows the chassis frame angle and not the actual
ground incline
• Risk of falling from the platform
The drill is designed to be moved from the three control points so we will, first,
describe the common procedure for all three control points and then how to operate
in the three control modes.
Figure: Remote control panel
1 Start the machine.
2 Bring the slide to the transport position
PMI
Slide carriage positioning mode screen
Remote control
Select Positioning mode (Yellow), Selector R05 on C.
Multi-function levers R13 – R14 – R15
3 Raise all the legs
PMI
Leg screen
Remote control
Select Leg mode (Orange) Selector R05 on A.
Multi-function levers R13 – R14 – R15
To Next Page
Loading...
